SHANGHAI SANZHOU AUTOMATION DASH CO.,LTD

    3601R  series Angle travel electronic electric actuator is based on 220V single-phase and 380V three-phase ac power as the driven power,accepting the control signal from the valve(DC4 ~ 20mA or DC1 ~ 5V).For achieving the new actuator type of angular drift(0 ° ~ 90 °) movement.The control unit designed box shape,With resin casting,adopts AC reversible motors.This is a kind of high reliability efficiency products.

   This series actuators are used for the control valves, has almost all the requirements of itself and valve travel signal functions and manual function degree. So are widely used in power, metallurgy, petrochemical industry, light industry and environmental protection industries.
 
Main technical parameters
Control signal:DC4~20mA，DC1~5V（Long distance avoid DC1~5V）
Output  signal:DC4~20mA，DC1~5V（Load resistance below 500Ω）
Operation: using state to select Changing Positive and negative effects by switch;Input signal switching, Fault signal valve selection of state.
Power：AC220V±10%，50Hz
Power consumption：（rated load）       
Specifications A type actuators 50VA
Specifications  B type actuators 150VA
specifications C type actuators 220VA
Basic error：±1% ；Hysteresis≤1% ；Dead zone≤1%
Adjusting range：0± 25%, rotor angle  20% ~ 100%
Output data：Please see table 1
Allowable Environmental temperature: Ordinary without space heaters -10℃~+60℃，Space heaters -35℃~+60℃，Flame-proof -10℃~+60℃
Allowable vibrations：Bellow 1.5g（g is for gravity acceleration）
Relative humidity: Ordinary under 95，Flame-proof 45% ~ 85%
Isolation marks：ExdⅡBT4
Protection level：IP65
Overload protection: A type and B type will be optional，C type should be matched