SHANGHAI SANZHOU AUTOMATION DASH CO.,LTD

    SECO Electric ceramics o-type ball valve，component by 3601R series angle travel electronic electric actuators and valve body.All contact with the media's part adopts zirconia ceramics, rockwell hardness HRA87 as aboveBesides with most advantages of metal ball valve. it also has strong corrosion resistance, temperature, abrasion and corrosion proof Characteristics,etc.Widely used in petrochemical, metallurgical, papermaking, power stations, refining industry of gases, liquids, acid and alkali salt mud and high temperature steam in the conveying system.And is strong corrosion situation titanium valve, monel valve ideal alternative.

   This series ceramic ball valve has advantages of low cost, high efficiency operation and long life,( 2 ~ 4 times of ti valve).

Its main application fields are as follows:
1 Power plants (desulphurizing installations, fly ash, lime and lime slurry, gypsum, filtrate etc.)
2 waste incineration (desulfurization, lime slurry, HCI absorption tower, etc.)
3 Steel plant(pulverized coal injection, steel mills and lime desulfurization MgO silicate, etc.),
4,Paper industry( kaolin rocks, talc, quartz off, and other paper MgO CaCO3, packing, bleach,  the filtrate NaOH,etc)
5. Chemical plant(acids, metal, organism, polymer, TiO2 grout, TiCI4, FeCI2, agent, mixture...).
6. Pneumatic conveying(lime, glass and cement, ore, gypsum, powder etc.)
7.Fertilizer (Nitric acid, phosphoric and melamine phosphate)

Valve Body
Type:                   Three pieces high Pressure casting/forging ball valve, Concrete structures please see figure 1
Nominal Size:       DN15、20、25、32、40、50、65、80、100、125、150、200
Nominal Pressure: GB PN1.0、1.6、 2.5、4.0 MPa
                           ANSI CLASS150, 300
End Connection: Flange  GB PN1.6、 2.5、 4.0、6.3 Mpa according to HG20596-97M、FM；
                          ANSI CLASS150、300 according to ANSI B16.5 RF and HG/T20615-97
Flange distance：PN1.6MPa、CLASS150 RF according to GB/T12221-1989，EN558.1:1995，ISO5752-1982 
                          PN2.5,4.0MPa、CLASS300RF according to GB/T12221-1989，EN558.1:1995，ISO5752-1982
Body Material：Please refer to table1 for Operated Temp. & Material contrast
Bonnet Type：  same with body
Packing Material: V-type compound packing、graphite compound packing、
                         graphite packing, Operating Temp. is shown in table 2
Body Seal Gasket：Spiral wound gasket, Graphite with metal gasket, Zigzag gasket, gasket,
                            Specific materials and suitable temperature range, please see table 3
Packing Gland ：Bolts pressure type
Oil paint:            Carbon steel shell surface required to paint, shell made of stainless steel and copper no painting .

Trim
Core type：             Direct cylindrical port body,
Flow characteristics: Quick opening
Ball core,Seat cover, packing set of material: zirconia ceramics
Valve stem:            17-4PH, 0Cr17Ni12Mo2Ti、 Hamiltonian alloy
Ball Plug rotor angle: 90°

Actuator
Type:   3601R series angle travel electronic electric actuators, 
Power: Single phaseAC220V±10% 50HZ，Three phase AC380V±10% 50HZ(If need three phase, please markout.）
Power consumption: A type 50VA，B type 150VA，C type220VA
Control signal:DC4~20mA，DC1~5V（Long distance avoid DC1~5V）
Output  signal:DC4~20mA，DC1~5V（Load resistance below 500Ω）
Function forms:Changes Positive and negative effects by switch
MAX rotor angle:90°
Adjust scope:  0±25%，rotor angle 20%~100%
Environmental temperature: Ordinary without space heaters -10℃~+60℃，Space heaters -35℃~+60℃，Flame-proof -10℃~+60℃
Relative humidity: Ordinary under 95，Flameproof 45% ~ 85%
 Protection level:  IP65
 Class of explosive-proof: Exd II BT4
 Overload protection: A type and B type will be optional，C type should be matched