SHANGHAI SANZHOU AUTOMATION DASH CO.,LTD

SELO/SETO Pneumatic 3-way ball valve is composed of GTX-B series pneumatic rack and pinion actuators and 3 way ball valve body assembly. It is divided into L-type (SPLO) and t-type (SPTO) according to different ball structures .SPLO-type is used for changing flow direction of medium, which can make two perpendicular channels connected or switch direction, SPTO-type can make three perpendicular channels connected or two of the three channels connected., and change the relative position of pipe and ball, it can also change direction of fluid in mutually perpendicular pipes and combined control of shunting fluid and mixing fluid. 3 way ball valve port has small resistance, large flow coefficient. Different metal and soft seal materials can guarantee reliable conveying and excellent cutting function at temperature of - 29 ° ~ 45 °.
SELO/SETO Pneumatic 3-way ball valve is characterized by compact structure, effective handle, steady and long lifetime.
 
It is widely used in industrial control area of petroleum, chemical, metallurgy, electric power, paper, metallurgy and sewage treatment etc.

Valve Body
Type: Two split 3-way cast ball valve (as shown in figure 1)
Nominal Diameter: DN15、20、25、40、50、65、80、100、150 、200
Nominal Pressure: GB PN1.6, 2.5, 4.0, 6.3Mpa
ANSI CLASS150, 300
End Connection: Flange  GB PN1.6、 2.5、 4.0、6.3 Mpa according to HG20596-97M、FM；
ANSI CLASS150、300 according to ANSI B16.5 RF and HG/T20615-97
Weld type
Socket weld according to ASME B16.4-2005，
Butt weld according to ASMEB16.4-2005
Screw type according to ASMEB16.4-2005
Face to Face Dimension：PN1.6,2.5,4.0,6.3MPa according to GB/T12221-1989，EN558.1:1995，ISO5752-1982 basic series 1
CLASS150,300 RF according to EN558.2:1995 and ISO5752-1982 basic series 1
Body Material：Please refer to table 1
Bonnet Type：Together with body
Packing Material: V-type compound packing、graphite compound packing、
graphite packing, Operating Temp. (As shown in table 2)
Seal Gasket：        Spiral wound gasket, Graphite with metal gasket, Zigzag gasket, Flat gasket.
                    Specific materials and operated temp. range as shown in table 3.
Packing Gland ：     Bolts impacted
Paint:   Carbon steel shell surface required to paint, stainless steel or copper surface without paint .

Trim
Ball type: Through-way full port ball, floating ball, ball is divided into L-type (SPLO) and t-type (SPTO), please refer to figure. 2
Trim material: STD material assembly and operated Temp. shown in table 4
Flow characteristics: Quickly opening
Rotary angle:   90°

Actuator
Type: GTX-B series pneumatic rack and pinion actuators
Material: Cylinder body: extruded aluminum alloy
Caps and piston: die-casting aluminum alloy
Action:    DA double acting;
          SR spring return, air to open or air to close
Structural Style: Double piston Double air-chamber rack and pinion(DA) , please refer to figure 3;
             Double piston Spring return rack-and pinion (SR),please refer to figure 3 and figure4
Air Pressure: double action 0.1~1.0Mpa，
Spring return 0.2~1.0Mpa
Working Temperature: -20℃~+150℃
Angle Rotation Adjustable Scope:90°±4°
Signal Interface:1/8″G，NAMUR1/4″G，NAMUR1/2″G
Dynamic Medium: clear, dry, non-corrosive air and other gas.
Surface Protection: Caps and springs ,Powder epoxy painted;
Cylinder body, anodic oxidation treatment after sand blast.
Standard Configuration with Valve: please refer to table 5

Accessory
Positioner, Filter-regulator valve, Solenoid valve, Limit switch,
Valve position Transmitter, Handwheel, Booster relay, Air control valve, Pneumatic lock-valve, etc.
 
Performance
Travel time：As shown in table 5
Seat leakage：Metal seal is according to ANSI B16.104 ClassⅣ，ClassⅤ
Soft seal is according to ANSI B16.104 ClassⅥ
Rated CV：As shown in table 5
Allowable pressure differential：As shown in table 6.1-6.4
Figure Size：As shown in figure 5，table 7.1,7.2
Weight of product：As shown in table 7.1,7.2